I need to glue the foam to the MDF bases. For this I used a glue marketed specifically for foam but any PVA glue should do fine. I generally use Elmer's Wood Glue for all my terrain gluing.
On the larger piece I made sure to put some heavy objects all over so as to make sure it glued up flat.
I don't have a picture of it, but for the altar end I glued one piece of foam to the MDF, then when that dried the other piece of foam on top. This gave me the high elevation I needed.
You'll also note the use of parchment paper. I lay this down so if there are glue drips they are easy to remove.
No comments:
Post a Comment